Barenco

THE DESIGN, MANUFACTURE AND SUPPLY OF HARDWARE, CABLE AND CONNECTORS TO THE COMMUNICATIONS INDUSTRY

T:+44 (0)1949 860400
F:+44 (0)1949 860773
E:sales@barenco.co.uk
Your Basket

You have no items in your shopping cart.

View all your basket items

Ground , Flat Roof & Drive-On Mountings

Fixed and freestanding ground support, flat roof mounts, ground sockets fixed with and without tilt, drive-on bases for portable amateur radio and commercial communications signal monitoring and free standing tripod brackets.

Set Descending Direction
  1. 4 SECTION INTERLOCKING MAT APPROX. 1 METRE SQUARE - BE100

    4 SECTION INTERLOCKING MAT APPROX. 1 METRE SQUARE - BE100

    4 Section interlocking mat approx. 1 metre square and siutable for all our flat roof mounting kits.      Please note:-  No hardware is supplied with this product, illustration purposes only.  Finish: Black

  2. 1.5" - 2" Mast Base Tilt Support Bracket Designed by Barenco, Galvanized with BZP Bolts - BE201

    BASE TILT SUPPORT - BE201

    Base tilt support is similar to the BE203 designed to hold a 2” or scaffolding size mast, used in conjunction with a suitable wall bracket to secure the mast in the upright position. Fixing will decide lowering line.

    Designed and manuf. by Barenco in our own workshop.

  3. BASE TILT SUPPORT WITH LOCK, ON 300mm SQUARE BASE - BE202

    BASE TILT SUPPORT WITH LOCK, ON 300mm SQUARE BASE - BE202

    The base tilt support is a combination of BE201 and BE205 designed to hold a 2” or scaffolding size mast, to be used in conjunction with a suitable wall bracket or guying system, an alternative maybe to the BE103 Field Station but without the gin pole arrangement.

  4. FLAT ROOF MOUNT SUPPORT FOR 2" or SCAFFOLDING POLE - BE106

    FLAT ROOF MOUNT SUPPORT FOR 2" OR SCAFFOLDING POLE - BE106

    Flat roof mount kit for a 2” pole ( not supplied ). When assembled will require a number of 450mm square slabs ( not supplied ) as ballast to hold firm. All fabricated parts are Galvanized. Base is approx. 1 metre square when assembled.

    Standard 450mm x 450mm x 32mm smooth concrete slabs (approximately 15 KG per slab) can be purchased from you local buiders merchants. 

  5. FLAT ROOF MOUNT SUPPORT WITH ROTATOR AND BEARING SUPPORT - BE108

    FLAT ROOF MOUNT SUPPORT WITH ROTATOR AND BEARING PLATFORMS - BE108

    Flat roof mount kit for a 1.5" to 2” pole (not supplied). When assembled will require a number of 450mm square slabs (not supplied). All fabricated parts are Galvanised. Base is approx. 1 metre square when assembled.

  6. 1.5" - 2" or Scaffolding Mast Free Standing Spider 3 Leg Support, Designed By Barenco, Galvanized - BE105

    FREE STANDING SPIDER - BE105

    Tripod bracket with 2" sockets to except various leg lengths giving ajustment over uneven ground if required. Low profile aids stability.

    Galvanized Heavy Duty. Manufactured by BARENCO

  7. 1.5" Mast Ground Spike Socket and 16mm x 200mm Spike, Designed By Barenco , Galvanized - BE208/1.5

    GROUND SOCKET 1.5" FIXED WITH SPIKE - BE208/1.5

    Ground spike with flat plate and socket. This ground spike will except 1.5" or 41mm tube inside and will allow tube with a bore larger than 2" or 51mm to slide over the outside. 

  8.  2" Mast or Scaffolding Ground Spike Socket and 16mm x 200mm Spike, Designed By Barenco , Galvanized - BE208/2

    GROUND SOCKET 2" FIXED WITH SPIKE - BE208/2

    Ground spike with flat plate and socket. This ground spike will except 2" or 51mm tube inside and will allow tube with a bore larger than 2.3/8" or 61mm to slide over the outside. 

  9. 1.5" - 2" Mast or Scaffolding Ground Spike Socket and Angle Iron Base, Designed By Barenco , Galvanized with BZP Bolts - BE207

    GROUND SPIKE WITH FIXED SOCKET AND ANGLE IRON BASE - BE207

    The ground spike comes in two types available with or without tilt, also in angle iron or round ground spike option.

    Choice of 4 options one should cover your requirements. If not we can manufacture to customer requirements.

  10. 1.5" - 2" Mast or Scaffolding Ground Spike With Tilt Socket and Angle Iron Base, Designed By Barenco , Galvanized with BZP Bolts - BE206

    GROUND SPIKE WITH TILT SOCKET AND ANGLE IRON BASE - BE206

    The ground spike comes in two types available with or without tilt, angle iron or round ground spike option.

    Choice of 4 options one should cover your requirements. If not we can manufacture to customer requirements.

  11. 1.5" - 2" Mast or Scaffolding Ground Spike With Tilt Socket and 48mm Tube Base, Designed By Barenco , Galvanized with BZP Bolts - BE206T

    GROUND SPIKE WITH TILT SOCKET AND TUBE BASE - BE206T

    The ground spike comes in two types available with or without tilt, angle iron or round ground spike option.

    Choice of 4 options one should cover your requirements. If not we can manufacture to customer requirements.

  12. 1.5" - 2" Mast or Scaffolding Ground Spike Socket and 48mm Tube Base, Designed By Barenco , Galvanized with BZP Bolts - BE207T

    GROUNG SPIKE WITH FIXED SOCKET AND TUBE BASE - BE207T

    The ground spike comes in two types available with or without tilt, also in angle iron or round ground spike option.

    Choice of 4 options one should cover your requirements. If not we can manufacture to customer requirements.

  13. 1.5" - 2" Scaffolding Mast Ground Support Socket, Galvanized with BZP Bolts - BE204

    MAST GROUND SOCKET 2"- BE204

    The mast ground socket is designed to hold a 1.5" - 2" or scaffolding mast, to be used in conjunction with a suitable wall bracket to secure the mast in the upright position. 

    Galvanized Heavy Duty Bracket. Manufactured by BARENCO

  14. MAST GROUND SOCKET 2.5" - BE213

    MAST GROUND SOCKET 2.5" - BE213

    The mast ground socket is designed to hold a 2.25" - 2.65" mast, to be used in conjunction with a suitable wall bracket to secure the mast in the upright position. 

    Galvanized Heavy Duty Bracket. Manufactured by BARENCO

  15. POLE SUPPORT TUBE BETWEEN FIBREGLASS MAST AND DRIVE-ON BASE - BE110

    POLE SUPPORT TUBE BETWEEN FIBREGLASS MAST AND DRIVE-ON BASE - BE110

    Scaffolding size tube 750mm long designed to hold a telescopic fibreglass poles BE1863 and BE2592 into a drive-on base BE104 style. Using black ABS saddles and stainless steel 'U' Bolts when the nuts are finger tight pole can be rotated if required.

     

     

  16. 1.5" - 2" or Scaffolding Mast Support Drive on Base Short Reach 230mm, Designed By Barenco, Galvanized, BZP Bolts - BE104

    PORTABLE DRIVE-ON MAST BASE - BE104

    This uses a vehicle as support and anchor weight. Standard and long version available.

    Please click here to see dimension guidelines for BE104 & BE104L.

  17. 1.5" - 2" or Scaffolding Mast Support Drive on Base Long Reach 370mm, Designed By Barenco, Galvanized, BZP Bolts - BE104L

    PORTABLE DRIVE-ON MAST BASE - LONG - BE104L

    This uses a vehicle as support and anchor weight - Long version of BE104

    Please click here to see dimension guidelines for BE104 & BE104L.

  18. PORTABLE DRIVE-ON MAST BASE TO TAKE 2.25-2.7" POLE - BE104/2.5

    PORTABLE DRIVE-ON MAST BASE TO TAKE 2.25-2.7" POLE - BE104/2.5

    This uses a vehicle as support and anchor weight. Standard and long version available. This version takes a pole from 2.25" - 2.7". 

    Base dimension as per standard BE104.


  19. PORTABLE DRIVE-ON MAST BASE TO TAKE 2.25-2.7" POLE - LONG - BE104/2.5L

    PORTABLE DRIVE-ON MAST BASE TO TAKE 2.25-2.7" POLE - LONG - BE104/2.5L

    This uses a vehicle as support and anchor weight - Long version of BE104/2.5

    Base dimension as per standard BE104L.

  20. 1.5" - 2.5" Mast Portable Tripod Bracket, Flat Pack Kit, Designed By Barenco, Galvanized - BE107

    PORTABLE TRIPOD BRACKET FOR1.5" - 2.5" MAST - BE107

    The three way base socket supports three legs which have been designed to be held down by the ground stakes provided or sand bags (dependant on the surface). The ground socket can take a pole or Telescopic mast ranging between 1.5" to 2.5" in diameter. A 3 way guy and bracing straps have been provided for added strength and stability.  Finish: Galvanized

  21. 1.5" - 2" Mast Short Tilt Support Bracket Designed by Barenco, Galvanized with BZP Bolts - BE203

    SHORT TILT SUPPORT - BE203

    The short tilt support is similar to the BE 201 but, is designed to hold a 1.5" - 2" aluminium mast, to be used in conjunction with a suitable wall bracket to secure the mast in the upright position. Fixing will decide lowering line.

    Galvanized Heavy Duty Bracket. Manufactured by BARENCO

  22. TILT OVER MAST BASE 2" ( FIELD STATION ) - BE103

    TILT OVER MAST BASE ( FIELD STATION ) - BE103

    Ideal temporary 2" or scaffolding mast support for field events or permanent location using gin pole technique. Designed and manufactured by Barenco.
  23. TILT OVER MAST SUPPORT - BE102

    TILT OVER MAST SUPPORT - BE102

    Pivot mast approx. 42" above ground with security latch mechanism. BE 102 is for installation on a concrete or similar foundation using 4 x 12mm sleeve anchors (BE 917/12) - (Supplied Separately)

Set Descending Direction