3 or 4 Way Rotatable Guy Rings

3 or 4 way rotatable guy ring that requires a support such as a sectional mast or mast coupler. Has a clean surface on underside for this purpose.

Made from 3mm thick Aluminium with overall diameter of 130mm and a bore size of 70mm and 6 x 10mm guy ring holes.

Guy ring will be supplied fully assembled but if required can be split for access onto a telescopic mast as required.

The plastic 2 part section is made from 12mm thick High Density Polyethylene and secured to the Aluminium with 4 x M5 x 20mm Csk pozi machine screws with flat washer and self locking nut.

As we manufacture this product we can supply the guy ring with any size hole required between 25mm and 52mm. Please contact our sales office for assistance. 

Please allow 1mm over the size of the mast to ensure a free running collar.

Stocked sizes are available as follows with specials, please allow 1 day extra.

Note:-  Holes are machined to ± 0.25mm.

31mm - for top section of our telescopic mast

38mm - for middle section of our telescopic mast

39mm - for 1.5" mast

45mm - for lower section of our telescopic mast

49mm - for scaffolding

52mm - for 2" mast